Mitsubishi F940GOT-LWD-E Technical Information PDF herunterladen (Seite 311)

Graphic Operation Terminal F940GOT Additional Functions (V 4.10/5.00 or later) 17

17-3

17.3 Connection to PLC manufactured by Siemens

17.3.1 Direct connection to CPU

• Connected PLC

Direct connection to CPU (RS-232C)

For connection, the HMI adapter is required. (Refer to the connection example shown

below.)

However, 416-1 and 416-2DP do not support some devices.

For the details, refer to the Operation Manual of F940GOT-E offered separately.

• Setting of PLC

Set the MPI address of the PLC connected to the GOT using the programming software

(STEP7) for the S7-300/400 Series PLC.

The MPI address of the HMI adapter is "1", and the maximum MPI address is "31".

Accordingly, make sure to set the MPI address of the PLC inside the range from 2 to 31.

• Setting of GOT

Set the connected PLC, the connection type and the station No. as shown below.

Table 17.4:

Applicable CPU

S7-300 Series 312IFM, 313, 314IFM, 315, 315-2DP, 316

S7-400 Series 412-1, 413-1, 413-2DP, 414-1, 414-2DP, 416-2DP

Table 17.5:

MPI address

Personal computer (for

programming)

0 (fixed in MPI network)

HMI adapter 1 (fixed)

PLC 2 to 31

Table 17.6:

PLC TYPE SIEMENS S7-300

CONNECTION CPU PORT (RS232C)

STATION #

MPI address (2 to 31) set in PLC

Have in mind that station Nos. "0" and "1" are treated as "2".

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 329 330

Keine Kommentare

Mitsubishi F940GOT-LWD-E Technical Information Seite 311