Mitsubishi RS232/485/LAN Serial Communication Control Handbuch Seite 219
- Seite / 349
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
11 GE Fanuc Automation
2-219
Chap.2
11.4 Environment Settings
The communication port settings for GE Fanuc PLCs and MICRO/I host port are as follows
11.4.1 Series 90-30 Communication Coprocessor Module (CMM)
Item Setting
Interface RS-232C RS-485-4wires
Baud Rate [bps] 1200/2400/4800/9600/19200
Data Bits[bit] 8 ( fixed )
Parity Odd /Even / None
Stop Bits[bit]
Set to the same
setting as the
MICRO/I
1 / 2
Flow Control None Hardware / None
Configuration Mode SNP Only
SNP Enable Yes
SNP Mode Slave
Do not set SNP ID for the PLC. If you set it, MICRO/I will not communicate with PLC.
11.4.2 Series 90-30 CPU Module
Item Setting
Interface RS-485-4wires
Baud Rate [bps] 1200/2400/4800/9600/19200
Data Bits[bit] 8( fixed )
Parity Odd /Even / None
Stop Bits[bit]
Set to the same
setting as the
MICRO/I
1 / 2
Do not set SNP ID for the PLC. If you set it, MICRO/I will not communicate with PLC.
- 1.1 Connection Table 14
- 1.1.1 Compatible PLCs 14
- 1 IDEC 15
- 2-15 15
- 1.2 System Configuration 17
- 2-19 19
- 2-21 21
- (part number: HG9Z-3C125) 22
- (part number: HG9Z-XC183) 22
- 2-23 23
- Server Unit ) 24
- 2-25 25
- 1.3 Connection Diagram 26
- 2-27 27
- 2-29 29
- 1.4 Environment Settings 34
- 1.4.3 MICRO 35
- 1.5 Usable Devices 37
- 1.5.2 FA-3S (CP12, CP13) 38
- 1.5.3 MICRO 39
- 2 Mitsubishi 41
- 2 Mitsubishi 43
- 2-43 43
- 2-45 45
- 2-47 47
- Q2ASH CPU-S1 48
- Q2ASHCPU 48
- Q2ASCPU-S1 48
- Q2ASCPU 48
- 2-49 49
- (part number: HG9Z-XC245) 50
- 2-51 51
- FX2NC-232ADP 52
- FX1N + FX1N-CNV-BD 52
- FX2N + FX2N-CNV-BD 52
- 2-53 53
- 2.3 Connection Diagram 54
- 2-57 57
- 2-59 59
- MICRO/I to 60
- Shield Wire 61
- 2.4 Environment Settings 63
- 2-65 65
- 2.4.6 MELSEC-FX Series 66
- MELSEC-Q/QnA 67
- 2.5 Usable Devices 69
- 2.5.1 MELSEC-AnA (LINK) 69
- 2.5.1 MELSEC-AnN (LINK) 70
- 2.5.2 MELSEC-AnA (CPU) 71
- 2.5.3 MELSEC-AnN (CPU) 72
- 2.5.4 MELSEC-AnU (CPU) 73
- 2.5.5 MELSEC-A1S/A2C (CPU) 74
- 2-75 75
- 2.5.6 MELSEC-Q/QnA(Link) 76
- 2-77 77
- 2.5.7 MELSEC-Q (CPU) 78
- 2-79 79
- 2.5.8 MELSEC-FX (CPU) 80
- 2.5.9 MELSEC-FX2N (CPU) 81
- 2.5.10 MELSEC-FX3UC (CPU) 82
- Word device 84
- 3 Omron 85
- 2-87 87
- (part number: HG9Z-3C135) 88
- (part number: HG9Z-XC155) 88
- 2-89 89
- 2-91 91
- (Connection Diagram 3-5) 92
- C200HS-CPU21/23/31/33 92
- Diagram 3-7 93
- 3.3 Connection Diagram 94
- 2-95 95
- 2-97 97
- 2-99 99
- Connector 100
- 3.4 Environment Settings 101
- 3.4.1 PLC Link Unit Settings 101
- System Settings Area 102
- Item Setting 102
- Channel Item Setting 103
- 3.4.4 C200H 104
- System Settings 105
- Port 1 Port 2 105
- Setting 106
- RS-232C 106
- 3.5 Usable Devices 107
- ・ Bit Device 108
- 3 Omron 109
- 2-109 109
- 4 Allen-Bradley PLCs 110
- Host I/F Driver 112
- 4.2 System Configuration 113
- 4.2.3 PLC-5 (CPU Direct) 113
- + 1761-NET-ENI 115
- 4.3 Connection Diagram 116
- PLC-5 (RS-232-C) to MICRO/I 117
- MICRO/I 119
- MICRO/I 120
- 4.4 Environment Settings 121
- 4.4.2 SLC 500 (Half Duplex) 122
- 4.4.3 PLC-5 123
- « Logix ».) 124
- 4.5 Compatible Devices 126
- 4 Allen-Bradley PLCs 127
- 2-127 127
- 2-129 129
- ・ Word Device 130
- １２３：２５５ 131
- １２３２５５0 and F1232551 132
- 4.5.2 SLC 500 (Half Duplex) 133
- 2-135 135
- 4.5.3 PLC-5 (Half Duplex) 136
- ：12 / 15 137
- ：12 / TD 137
- 2-139 139
- 4.5.4 Ethernet/IP 140
- ：277/17 141
- １０：１２３/５ 142
- １０１２３０５ 142
- １２：１２３/EN 142
- 2-143 143
- １２３２５５0 or F1232551 145
- Bit Device 146
- 2-147 147
- Word Device 148
- 2-149 149
- 4.6.1 The way of mapping 151
- 5 SIEMENS 154
- 5.2 System Configuration 155
- 5.2.1 S7-200 155
- 5.2.2 S7-300/400 155
- Internal 156
- 330-Ohm 156
- 5 SIEMENS 157
- 2-157 157
- 5.4 Environment Settings 158
- 5.4.1 S7-200 158
- 5.4.2 S7-300/S7-400 159
- 5.5 Usable Devices 160
- 5.5.1 S7-200 160
- 2-161 161
- 5.5.2 S7-300/S7-400 162
- 6 Keyence 163
- 6.2 System Configuration 164
- KV Series 165
- 6.3 Connection Diagram 166
- 6.4 Environment Settings 170
- 6 Keyence 171
- 2-171 171
- 6.5 Usable Devices 172
- 6.5.1 KV-700/1000 172
- 2-173 173
- 7.SHARP 175
- 7.2 System Configuration 176
- 7.SHARP 177
- 2-177 177
- 7.2.6 JW10 Series 178
- 7.4 Environment Settings 185
- 7.5 Usable Devices 187
- 8 Hitachi 189
- 8.2 System Configuration 190
- 8 Hitachi 191
- 2-191 191
- 2-193 193
- 8.4 Environment Settings 194
- 8.4.1 S10mini, S10V 194
- 8.5 Usable Devices 195
- DW 0-15 DW 0-0 196
- 2-197 197
- 9 JTEKT(Toyoda) 198
- 9.2 System Configuration 199
- 9.4 Environment Settings 202
- 9.4.1 TOYOPUC-PC3J Series 202
- 9.5 Usable Devices 203
- 9.5.1 TOYOPUC-PC3J 203
- 9 JTEKT(Toyoda) 205
- 2-205 205
- 10 Toshiba Machine Works 207
- Connection Diagram 10-1 208
- TC3-13B1 208
- 10.3 Connection Diagram 209
- Connection Diagram 10-2 209
- TCmini (RS-232C) - MICRO/I 209
- 10.4 Environment Settings 211
- 10.4.1 TC200 211
- 10.5 Usable Devices 212
- 11 GE Fanuc Automation 213
- 11.2 System Configuration 214
- 11.3 Connection Diagram 215
- (CMM) (RS-232C) to MICRO/I 215
- 11.4 Environment Settings 219
- 11.4.3 VersaMax Micro/Nano 220
- 11.5 Usable Devices 221
- 12 Modbus 223
- 12.1.2 Compatible PLCs 224
- 12 Modbus 225
- 2-225 225
- Manufacturer 226
- 12.2 System Configuration 227
- 12.2.1 Modbus RTU Master 227
- 12.2.2 Modbus/TCP Client 227
- 12.2.3 Modbus/TCP Server 227
- 12.2.4 Twido 228
- 2-229 229
- 2-231 231
- HG3F/4F 232
- Ethernet 232
- 10BASE-T 232
- 171CCC9602 232
- 2-233 233
- 12.3 Connection Diagram 234
- 12.4 Environment Settings 237
- 12.4.1 Twido 237
- 12.5 Usable Devices 238
- 2-239 239
- 12.6 MODBUS/TCP Server 240
- 12.6.1.1 Overview 240
- 12.6.2 System Configuration 241
- 12.6.3 Wiring 241
- 12.6.4 Devices 242
- 12.6.5 Settings 243
- 12.6.6 Communication Format 244
- 12.6.6.2 Basic Format 245
- 12.6.6.3 Reference Numbers 246
- 12.6.6.4 Functions 247
- 2-249 249
- FC1 Read coils 249
- FC2 Read discrete inputs 250
- 2-251 251
- FC4 Read input registers 251
- FC5 Write coil 252
- 2-253 253
- FC6 Write single register 253
- 12.5.6.5 Exception code 254
- 13 Panasonic(AROMAT) 255
- Panasonic(AROMAT) 256
- 13.2 System Configuration 257
- 13.2.1 AROMAT 257
- AFPG801 258
- 13 Panasonic(AROMAT) 259
- 2-259 259
- 13.3 Connection Diagram 260
- 2-261 261
- 2-263 263
- 2-265 265
- 13.4 Environment Settings 266
- 13.4.1 AROMAT FP series 266
- 2-267 267
- Items Details 268
- 13.5 Usable Devices 269
- 14 YASKAWA 270
- 14 YASKAWA 271
- 2-271 271
- 14.2.3 MP2300 272
- 217IF-01 272
- 14.3 Connection Diagram 273
- 14.4 Environment Settings 278
- 14.4.1 MP920, MP930, MP2300 278
- 14.5 Usable Devices 279
- 15 Koyo 280
- 15.2 System Configuration 281
- RS-232C port) 281
- Connection 282
- Diagram 15-3 282
- 15 Koyo 283
- 15.3 Connection Diagram 284
- 15.4 Environment Settings 287
- 15.4.2 D4-DCM 287
- 15.5 Usable Devices 289
- 15.5.1 DL405 289
- 15.5.2 DL205 291
- Word Device 294
- 16 FANUC 295
- 16.2 System Configuration 296
- 16.2.1 Power Mate-MODEL D 296
- 16.4 Environment Settings 299
- 16.4.1 Power Mate-MODEL D 299
- 16.5 Usable Devices 300
- 17 YOKOGAWA 301
- 17.2 System Configuration 302
- 17.2.1 YOKOGAWA 302
- 17.3 Connection Diagram 303
- MICRO/I 303
- 17.4 Environment Settings 306
- 17.4.1 YOKOGAWA FA-M3 306
- 17.5 Usable Devices 307
- 18 INVERTER 309
- 18.2 System Configuration 310
- 18.2.1 Mitsubishi 310
- 18.4 Environment Settings 312
- 18.5 Usable Devices 313
- 19 FUJI 315
- NB Series 317
- NJ Series 318
- NS Series 318
- 19 FUJI 319
- 19.5 Usable Devices 328
- 19.5.1 FREX-PC 328
- Bit Device 328
- 19.5.2 MICREX-F 329
- 20 Toshiba 331
- 20.2 System Configuration 333
- 20.2.1 PROSEC T Series T1 333
- 20.2.2 PROSEC T Series T1S 333
- 20.2.4 PROSEC T Series T2E 334
- 20.2.5 PROSEC T Series T2N 335
- 20 Toshiba 337
- 形(RS-485/422) 339
- 21 LS Industrial Systems 343
- 21.2 System Configuration 344
- Connection Diagram 21-4 345
- Chapter 1 346
- 21 LS Industrial Systems 347
- 2-349 349
Verwandte Produkte und Handbücher für Vernetzung Mitsubishi RS232/485/LAN Serial Communication Control
Vernetzung Mitsubishi FX2N Bedienungsanleitung
(142 Seiten)
(142 Seiten)
Vernetzung Mitsubishi FX2N Spezifikationen
(8 Seiten)
(8 Seiten)
Vernetzung Mitsubishi R100 Bedienungsanleitung
(102 Seiten)
(102 Seiten)
Vernetzung Mitsubishi SH-080007 Bedienungsanleitung
(424 Seiten)
(424 Seiten)
Vernetzung Mitsubishi E1032 Betriebsanweisung
(65 Seiten)
(65 Seiten)
Vernetzung Mitsubishi R100 Bedienungsanleitung
(272 Seiten)
(272 Seiten)
(542 Seiten)
Vernetzung Mitsubishi A8GT-50KBF Spezifikationen
(33 Seiten)
(33 Seiten)
Vernetzung Mitsubishi 2404f Bedienungsanleitung
(230 Seiten)
(230 Seiten)
Vernetzung Mitsubishi 2408f Handbuch
(30 Seiten)
(30 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.240 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern