Mitsubishi MR-508XL Spezifikationen PDF herunterladen (Seite 16)

7.16

Bimba Position Feedback Cylinder Rod Lock

How it Works

• Dowel pins ride in the cam groove.

• When air pressure is present, piston actuates and dowel pins follow cam to

open position, allowing piston rod to travel freely through clamp.

• In absence of pressure, the spring actuates piston and dowels follow to

closed position, activating the rod clamp.

Engineering Specifications*

Operating Medium: Air

Operating Pressure: 50 psi minimum (to actuate lock piston)

125 psi maximum

Temperature Range: -20 to +200 degrees F

Lubrication: HT-99

Cylinder Body: 304 stainless steel

Rod Guide: Aluminum

Cap: Anodized aluminum

Piston and Rod Seal: Buna-N

Rod and Pivot Bushing: Sintered bronze

Piston Rod: Hard chrome plated carbon steel

Expected Service Life: 5 million cylinder actuations

1 million lock actuations

*PFC specifications are on page 7.15.

Operating Guidelines/Product Precautions

• The Rod Lock is not a safety device.

• Do not use for intermediate stopping; the cylinder is designed

to prevent drift from a stationary position.

• Load weight must not exceed the stated holding force for the

cylinder.

• Do not release rod lock if full pressure is present on either

extend or retract. Uncontrolled motion will result that could

damage internal components or cause personal harm.

Rod Lock Holding Forces

Bore

Holding Force

(Pounds)

3/4" (04) 40

1-1/16" (09) 90

1-1/2" (17) 170

2" (31) 310

2-1/2" (50) 500

3" (70) 700

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 52 53

Keine Kommentare

Mitsubishi MR-508XL Spezifikationen Seite 16