Mitsubishi SRK20HG Bedienungsanleitung PDF herunterladen (Seite 2)

CONSTANT SPEED MODEL

15m

Maximum height difference

Maximum pipe length

Refrigerant pipe length

Heat Pump

SRK20HG

SRK28HG

SRK40HG

SRC20HG

SRC28HG

SRC40HG

SRC52HE-2

SRC63HE-2

SRC71HE-2

CFD (computational fluid dynamics), used in blade shape design

of jet engines, has been applied to the design of air channels in air

conditioners to develop the ideal air channel system (air

circulation). The airflow of the jets created in this system enable a

large volume of air to be blown with minimum power

consumption, yet the air flow is uniform, quiet and reaches points a

long distance from the blower.

Old typeNew type

Colors in the figure show the air speed.

Slow Fast

We used the same aerodynamic analysis technology as

used in developing jet engines.

Aircraft technology was used in the design

of the air conditioner’s airflow system

The air conditioner main body employs

a tourmaline-coated sheet. The sheet

generates negative ions around the clock.

Even when the air conditioner is not

running, it generates as many negative ions

(2,500– 3,000/cc) as in a forest, stream or

fall does, allowing you to experience them

without incurring any electrical charges.

Generates the same amount of negative ions as a forest environment

“Self clean operation” is operated

for 2 hours after the unit has stopped

its normal operation.

The indoor unit is dried up and the

growth of mold is restrained. Users

can select whether this mode is

utilized or not.

Stop run

2hrs

Normal

operation

Clean

operation

Shuts off automatically

Situation of mold after one week

Fungal mycelia

expand.

When you don’t execute “Self Clean Operation”

The spore of mold

doesn't germinate.

When you execute “Self Clean Operation”

Always keeping the indoor unit clean

Coupling

Cell wall

Filter fiber

Enzyme

Bacterium

Powerful

sterilizing effect

Enzyme's sterilizing mechanism

Airflow

Conventional Filter Enzyme Filter

Analysis Zone

First in the world

Enzymes used in these filters are naturally occurring lytic enzymes.

The lytic enzymes attack cell walls of microorganisms trapped on a

filter and destroy them and doing so, have a powerful sterilizing

which will effect decrease the number of molds and bacteria

Natural Enzyme Filter will clean and sanitize air passing through it

to keep air in the room clean and safe.

The first release in this range of the enzyme-sterilizing filter

Sure to destroy fungi and bacteria, also effective on viruses and

allergenic compounds (Cat hair, dust mite, pollen etc.)

It will keep the air fresh by

deodorizing the molecules

causing odor. Its deodorizing

power can be restored by

washing with water and

drying under the sun, as such

it is a Recycling deodorizing

filter capable of repeat use.

The deodorizing ability of this filter can be easily restored

simply by cleaning and exposing to the sunlight

The printed wiring board of the outdoor unit is coated by silicon.

It lasts long having a tolerance for humidity.

Long lasting

The blower fan has undergone anti-microbial treatment to resist

mold and germs, making the system clean and safe. Foul odors

and molds, etc. which can occur when an air conditioning system

is not in operation are prevented.

Anti-microbial specifications and design

will deliver cleanliness and safety

Fungal

mycelia

Spore

of mold

Spore

of mold

Comfortable Functions

Comfortable Air Flow Functions

Automatic Operation

The air conditioner automatically selects from among heating,

cooling and dry operations.

Three "Hot" System

This series offers three "hot" systems. "Hot start" allows the unit to

begin operating immediately, while the "hot spurt" fast-heating

system works to increase the temperature setting by two degrees.

The "hot keep" system is used during automatic defrosting or to

prevent the influx of cool air. These three operational control

systems help ensure comfortable and efficient heating.

On Timer

This facility enables the operation to start a little earlier, so that the

room approaches optimum temperature at ON time when the

operation is started by ON-TIMER.

Thus it will try to be at the temperature you want, when you want.

On Timer

24-hour On/Off Programmable Timer

By combining a start timer with a stop timer, you can register two

timer operations a day. Once set, timers will faithfully start or

stop the system at a specified time of the day repeatedly.

24h Timer

Memory Flap

While the flap is swinging, it can be stopped at any angle desired.

The flap returns to the position that it was in when operation last

Memory

SWING FLAP

Flap moves up and down continuously.

Up/Down Flap Swing

The UP/DOWN flap can be adjusted to the preferred operations

angle, ranging from horizontal to perpendicular.

UP/DOWN

Microcomputer-Operated Defrosting

This mode automatically eliminates frost, and helps minimize

excessive operation in other modes.

When removing the air inlet

panel for internal cleaning or

others, open the grill by 65

degrees and then pull it to

this side.

Detachable Indoor Air Inlet Panel

The air inlet panel on the indoor unit opens and closes easily,

making filter cleaning simple. The suction panel can also be

removed.

Detachable

Self-Diagnostic Function

In the case that the air conditioner malfunctions, an internal

microcomputer automatically runs a self-diagnosis. (Inspection

and repair should be performed by authorized dealers.)

Diagnostic

Self

Auto Restart Function

Restart

Auto

Power blackout auto restart function is a function that records the

operational status of the air-conditioner immediately prior to it being

switched off by a power cut, and then automatically resumes

operations at that point after the power has been restored.

Back-up Switch

Back-up

Switch

On the main unit,there is a backup on/off switch, which is useful

when you can't use remote control, or batteries are flat.

Horizontal blowing

COOLING & DRY

Slant forward blowing

HEATING

Auto Flap Mode

Whatever the operating mode is, the unit automatically selects

the optimal angle.

Auto Flap

Luminas Button

With wireless “Luminas” remote controls that even “glow in the

dark”, it is possible to operate all desired functions of the unit

with the click of a button.

Luminas

24-hour ION

Tourmaline-coated sheet generates negative ions around the

clock. Even when the air conditioner is not running, it generates

as many negative ions as a forest, stream or fall does, allowing

you to experience them without incurring any electricity charges.

24h ION

Others

Economy Mode

Economy

The unit realizes effective energy saving operation, while still

keeping a comfortable cooling and heating condition.

Dry Operation

DRY

The unit dehumidifies the room by intermittent cooling operation.

Off Timer

OFF Timer

The unit stops automatically at the set time.

Sleep Mode

Sleep

The room temperature is automatically controlled during the set

sleep mode period, ensuring that room temperature will not get

too cold or too hot.

Convenience & Economy Functions

Maintenance & Prevention Functions

"HI POWER" Operation

The unit can operate continuously in "HI POWER" mode for 15

minutes. This mode is convenient to reach the desired

temperature quickly.

Thick line : moves quickly

Thin line : moves slowly

COOLING & DRY

HEATING

Thick line : moves quickly

Thin line : moves slowly

Air Scroll

The swing of the flap causes the air flow to spiral as it reaches

the floor, and breeze reaches all of a room.

Air Scroll

SRK52/63/71HE-2

Lateral swing

It sends a pleasant breeze to a wide range in the room by

swinging the louver to right and left automatically. Louver

angle can be fixed at any desired position.

Lateral

Swing

SRK52/63/71HE-2

SRK52HE-2

SRK63HE-2

SRK71HE-2

Item

Model

(Indoor unit/Outdoor unit)

Power source

Cooling capacity

Heating capacity

Cooling input

Heating input

COP (In cooling)

COP (In heating)

Cooling current

Heating current

Sound power level

(Indoor/Outdoor)

Sound pressure level

(Hi / Me / Lo)

Exterior dimensions

(HXWXD)

Net weight

Refrigerant piping

(Outer dimention)

Refrigerant

Clean filter

ISO-T1(JIS)

Cooling

Heating

Cooling(Indoor)

Heating(Indoor)

Indoor/Outdoor

Liquid line

Gas line

dB(A)

mm(in)

1Phase, 220/230/240V, 50Hz

2.07

2.36

0.655

0.64

3.16

3.69

2.9/3.1/3.3

53/59

35/28/26

34/31/27

8.5/28

2.53

2.67

0.77

0.685

3.29

3.90

3.6/3.4/3.2

3.2/3.0/2.8

55/60

56/60

39/33/30

39/33/29

268X790X 199 / 540X 780X290

8.5/31

6.35 (1/4")

3.5

3.7

1.09

3.21

3.39

5.0/4.8/4.6

56/63

57/64

40/38/34

8.5/38

12.7 (1/2")

SRK/SRC20HG SRK/SRC28HG SRK/SRC40HG

SPECIFICATIONS

5.4

5.6

1.73

1.49

3.12

3.76

8.6/8.3/7.9

7.4/7.1/6.8

59/65

43/39/36

41/39/37

15/47

SRK/SRC52HE-2

6.1

6.3

2.17

1.83

2.81

3.44

10.8/10.4/9.9

9.1/8.7/8.4

59/65

60/65

44/40/37

42/40/38

15/48

6.35 (1/4")

15.88 (5/8")

SRK/SRC63HE-2

6.8

7.2

2.05

1.88

3.32

3.83

10.2/9.8/9.4

9.4/9.0/8.6

59/69

59/70

45/41/38

44/42/39

318X1098X 248 / 750X880X 340

15/63

SRK/SRC71HE-2

9.52 (3/8")

R22

Natural Enzyme FilterX1 Photocatalytic Washable Deodorizing FilterX1

318X1098X 248 / 640X850X 290

HOT

SRK-HG

HE-2

series

1 2 3 4

Heat pump 1
Heat Pump 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Mitsubishi SRK20HG Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Split-System-Klimaanlagen Mitsubishi SRK20HG