English-24
Computer
(RS-232C connection)
Rear of LCD monitor (fi rst monitor) Rear of LCD monitor (second monitor)
RS-232C IN RS-232C IN
RS-232C OUT RS-232C OUT
RS-232C cable RS-232C cable
RS-232C
P-6 Connecting RS-232C
Carry out as necessary
Monitor control via RS-232C
By connecting multiple LCD monitors and a computer using RS-232C cables (commercially available) or CAT5 cables (commercially
available), you can control the monitors from the computer via the supplied CAT5 Tx BOX for the following operations:
• Power ON or OFF
• Switching between input signals
Connection
Connection by RS-232C (For RS-232C cable (commercially available), the reverse type cable should be used.)
• Before making connections, turn off the personal computer and the monitors.
• Start the personal computer fi rst, and then turn on the monitors. (Otherwise, the com port may be unusable.)
CAUTION:
Never connect network devices to the CAT5 IN and OUT connectors. If you do so, they may adversely affect with each other,
causing breakdown.
NOTE:
If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required.
Contact your dealer for details.
Kommentare zu diesen Handbüchern