Mitsubishi F5M41 Bedienungsanleitung PDF herunterladen (Seite 30)

INPUT SHAFT

MANUAL TRANSMISSION OVERHAUL

22B-30

REASSEMBLY SERVICE POINTS

>>A<< OIL SEAL INSTALLATION

Install the oil seal into the end of the input shaft as

shown.

>>B<< BALL BEARING INSTALLATION

1. Using special tool Bearing remover (MD998801),

support the 2nd speed gear portion of the input

shaft, and then set them on the press.

2. Using special tools, press install the ball bearing

with the press.

• Installer cap (MD998812)

• Installer-100 (MD998813)

• Installer adapter (MD998816)

>>C<< SNAP RING INSTALLATION

1. Install the thickest snap ring that can be fitted in

the snap ring groove of input shaft.

2. Make sure that the front bearing end play meets

the standard value.

Standard value: 0 − 0.12 mm

>>D<< SYNCHRONIZER SPRING INSTALLATION

Install the synchronizer spring onto the synchronizer

ring as shown.

>>E<< SYNCHRONIZER RING INSTALLATION

CAUTION

There are 3rd speed and 4th speed synchronizer

rings, if the wrong one is installed it will effect

the shift feeling.

1. Ascertain whether or not there are identification

notches on the synchronizer ring.

Two notches: 3rd speed synchronizer ring

No notches: 4th speed synchronizer ring

2. Install the synchronizer ring so that it completely

fits over the machined cone of the gear.

>>F<< 3RD-4TH SPEED SYNCHRONIZER HUB

INSTALLATION

AK204243

3.5 mm

Oil seal

AK204244

MD998812

MD998813

MD998801

MD998816

AK204245

Snap ring

AK204263

SYNCHRONIZER

SPRING

Synchrnizer

spring

AK204312

Notch

AK204295

Installation

direction

Groove

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

Mitsubishi F5M41 Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kfz-Zubehör & Komponenten Mitsubishi F5M41